My Preferred Dealer
Find a Specific Product: Cut-off Machines
Image of BigMood

Cut-off Machines

Renowned quality for the jobsite

There are no tougher jobs than those on construction sites and demolition operations. And a STIHL Cutquik® cut-off machine can be an ideal companion on those jobs. STIHL cut-off machines are number one worldwide and they deliver superior power and convenient controls.

So make sure you have construction tools on the job site that deliver. Get STIHL quality, dependability and power today.

Note: STIHL recommends use of fuel with no more than 10% ethanol content. Using fuel with greater than 10% ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…

  1. 2 years ago
    Overall great saw.
    This things are expensive. I had a really old one that was having compression problems and would always cause the pull rope to break at the worst times. So I finally gave in and bought a new TS420. Like I said, they're very pricey. So far the saw runs great. Fires right up within three pulls when cold, and always on the first pull once it's warmed up. Only thing I don't like is it feel bogged down when the blade is fully plunged in concrete, which is why I'm giving it four stars for the power ... read more category. I do a lot of Versa Lok retaining walls, which are 6" tall blocks. I wish the blade on this thing could cut 6" deep, but it doesn't. You have to make one cut, then flip the block over and finish it off, which really eats up a lot of time when you're cutting a lot of block while building a wall. Definitely something I wish Stihl would consider changing in their design.
  2. 5 years ago
    champ
    I am a demolition contractor and I have many chop saws and I by far can say this ts420 I a good move the only down fall is if you do not know haw to start it you will faile I put all my men thru training and we have no problems..... Check you filter and do a monthly inspection and you will be fine.
  3. 11 months ago
    Hands down , the best!
    We’ve been using and abusing the 400 s , 410s and 420s for 20 years now , cutting all types of materials but mostly masonry and concrete; when you do that on a daily basis with no maintenance at all ( we run them until they die and then replace them) and get a 2-3 years out a unit , you cannot rate this machines lower then 5 stars, top notch pieces of equipment. We won’t buy anything else , period.
  1. 4 years ago
    Better than expect,
    We bought 2 extra batteries and a extra charger so we could cut continuously. Be sure to have extra blade as well, many stores do not carry a blade that will fit. In the process of buying another unit.
  2. 4 years ago
    its time to come out with a saw for rhe brick layers
    I've been a bricklayer for 35 years an when I seen this saw I thought to myself it's about time that they came out with this saw that's light and manageable to 2000 a wall it is very impressive but they need another inch on a saw blade very impressed but it doesn't cut through a brick if that ever is done I would buy it in a minute matter of fact I know 10 bricklayers that would buy it right away start thinking about tand I guarantee it your sales would increase 50%he bricklayers
  3. 1 year ago
    Great for light work.
    This saw is one of my favorite purchases I’ve ever made. Sometimes I don’t want to drag the old gas saw out. It’s loud and smelly. Haha. Cut hundreds of brick pavers the other day, just cycling out batteries. Cuts through sandstone and limestone like butter. Quiet and lightweight. Also purchased the weedwacker and leaf blower. Love them, too. Please come out with a demo hammer!
  1. 2 years ago
    Gets it done.. QUICK
    worked great for what I need to do! Cutting 4-8 thick concrete is relatively easy with this thing.
  2. 6 years ago
    Great power
    I just picked up the ts-800 for a commercial job of mine,I had to cut 200 feet of concrete out. The power of the saw and the water attachment worked well! I suggest you buy the cart for the saw too.
  3. 1 year ago
    The only saw
    I’ve been cutting concrete only for 15 years as a saw cutter nothing but a stihl and the biggest at that I’m a small guy and the power reduces cutting time enough to make up for the weight with a good 16 inch blade it cuts silly fast and last for 7 to 15 years we have 20 trucks all with stihl hand saws the ts 420 line has problems with starting no mater what with a stihl in California weather never use the primer bulb it only floods it the 800 doesn’t need it just freaking starts I’ve started ... read more mine with a boot lace before and used up blades in the thousands this is your handsaw if you want reliable power
  1. 7 years ago
    Best Demo Saw
    Im a professional concrete paver installer, and I have used all of the brands over the last fifteen years. This model saw is the best. It is the easiest to start, and the filter system is excellent. These saws have been the most reliable, only problem i have ever had is the pull chords are prone to breaking. The handle location on the top of the saw instead of the back like all others, is so much more comfortable and makes the saw more manuverable. Also parts are much more affordable and readily ... read more available compared to all the other brands Ive had, which I think is all of them.
  2. 2 years ago
    Everything I expected
    After having several TS-350s, some in the stable for 20 years, I upgraded to the TS-410. It is a little bit lighter, but more importantly, it is balance so that you don't feel it is working against you. There is definitely less vibration too. I also bought the STIHL pressurized water tank, primarily cutting concrete roof tile. It takes a little time to determine the right flow of water to minimize water usage while also keeping the slurry diluted enough to run off or recapture the water. So far ... read more I am totally pleased ith the new saw and system.
  1. 2 years ago
    The Best Cut-Off Saw on the Market... Period.
    This saw beats out every competitor on the market. We have used pretty much every saw brand out there and none cut nearly as fast and effortlessly as this saw(especially the other orange ones). As for the plastic, we are happy with it, since the weight of the saw can get heavy at times. As long as you take care of this saw, maintain it properly, and not let it get stolen, then it will pay for itself shortly. Don't waste your time or money looking anywhere else... get a Stihl.
  2. 6 years ago
    The Stihl TS700 is the best choice for all your cut-off saw needs, no matter how demanding.
    I typically use a cut-off saw to install vehicle loop detectors in asphalt and concrete driveways and roadways. In the past I have rented a Makita saw from a local rental agency. Much to my despair, this saw didn't have enough power to allow me to keep it in the material being cut very long at all. I would have to plunge the saw after holding down the trigger all the way and would only be able to cut a few inches at a time. This was very time consuming and very physically exhausting, especially ... read more on my back. A good friend of mine owns an older TS700 with a quick cart, and suggested I borrow his saw to see how I liked it. After completion of a job in literally 25% of the time it took with the rented saw with no pain, I was sold. The TS700 did not bog at all in the hot asphalt. Not only did I purchase a TS700 saw with a quick cart, but I also purchased a BG86 blower to keep the dust down while using the TS700. So now I have a Stihl chainsaw, weed trimmer, cut-off saw, and blower. Stihl products are definitely the way to go for professional grade tools with the the best performance and dependability in the industry. I'm sold!
  3. 2 years ago
    Stihl still the best!
    I love the TS 700. I got a LOT of work out if my TS 400's ( demolition, block walls , pavers concrete and asphalt cuts ,etc) . They never let me down, just had to maintain them correctly and they paid for themselves in no time at all. I had my eye on the 700 tho because of the extra power and man, that was no bs! The TS 700 is the best 14" ive operated and i respect husqvarna/partner k760 hilti dsh 700 and makita/dolmar too but for overall performance, durability and dependability why, i dobt ... read more even think its close. TS 700 is my personal favorite and it paid for itself in ONE JOB!!! Anyway, thats just my humble opinion. God bless, Matt Amick
  1. 1 year ago
    Works well, meets new compliance standards
    We use these tanks with our cut-off saws cutting concrete, etc. that creates silica dust. These meet compliance, but mostly they do a great job helping keep the saw-blades cool and knocking down the dust.
  2. 5 years ago
    Great
    Great product water only last about 10 min but anything beats breathing in dust for those 10 min.
  3. 4 years ago
    very maneuverable
    I use the tank with a 420 saw and it makes the saw very maneuverable. I often use this saw to cut walls for basement egress windows and the flexibility of the hose when you are in a hole is awesome. The hose on it is long enough that I don't need to have the tank right next to me which is nice for cramped spaces. The tank also stays pressurized for a good amount of time before needing to get pumped back up. Ditch the garden hose and buy this tank.
  • 2019-09-29
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_17
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_6
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 47ms
  • SPOTLIGHTS, CATEGORY